Nowadays, with the increase in types of work, a variety of dangerous work also came one after another, and protective gloves is to protect the important material of labour, in fact, there are many types of protective gloves, a variety of types for different ranges, so in the purchase of also have to pay attention to the following compilation of the introduction of the protective gloves as well as the purchase of precautions, come and take a look!
First, the types of protective gloves and introduction
1, insulated gloves for electric work
This glove is the operator in the AC voltage of 10 kV and the following electrical equipment (or the corresponding voltage level of DC electrical equipment) on the charged operation, need to wear on the hand to play an electrical insulation role of a kind of insulated gloves.
The type of gloves, external dimensions and technical requirements must comply with the "general technical conditions for insulating gloves for live electrical work" of the relevant provisions of the electrical insulation properties must be very strong, but also with tensile strength, elongation at tear, puncture resistance, aging resistance, flame-resistant properties and low temperature resistance, and so on.
2, acid and alkali gloves
As the name suggests, these gloves are designed to prevent acid and alkali injuries to the hand protection products, the quality of which should be in line with the "acid (alkali) gloves" regulations. Gloves are not allowed to spray frost, brittle, sticky and broken and other defects. Gloves must be airtight, under a specific pressure, no air leakage is allowed to occur. These gloves can be divided into rubber acid and alkali gloves, latex acid and alkali gloves, plastic acid and alkali gloves, plastic dipped acid and alkali gloves and other types of gloves according to the material.
3, Oil-resistant gloves
These gloves are made of nitrile rubber, chloroprene or polyurethane, and are mainly used in oil and grease work scenes to protect the skin of the hand from the stimulation of oil and grease substances.
4, Welding gloves
In order to prevent the welding of high temperature, molten metal, sparks and other protective equipment equipped with staff burns, welding gloves have a strict appearance requirements, the first grade requires the leather body thickness uniformity, plump, soft and elastic, the leather surface velvet is meticulous, uniform, firm, colour shades of the same, no sense of greasiness. The second grade requires that the leather body lacks fullness and elasticity, the leather surface is coarse, and the colour is slightly darker and lighter.
5, anti-vibration gloves
Involving a lot of vibration operations, forestry, mining, construction and other engineering and construction of handheld vibration tool vibration is unavoidable, the general public know that such vibration will gradually make people numb, in fact, will also cause occupational diseases, so such operations must be equipped with vibration gloves! Vibration gloves are mainly in the palm of the hand to add a certain thickness of foam, latex and air sandwich to absorb vibration, but the thickness of the liner is not the thicker the better, too thin over will affect the operation.
6, Fire retardant gloves
Traditional fire-resistant gloves made of asbestos material, because of asbestos fibre irritation of human skin, has been rarely used, most of the fire-resistant gloves made of flame retardant canvas or other fire-resistant and flame retardant fabrics, suitable for smelting furnace foreman or other types of furnaces and kilns used.
7, anti-static gloves
Antistatic gloves made of materials generally include two kinds, one is the use of woven materials containing conductive fibres, this material antistatic gloves can make the accumulation of static electricity in the hand quickly disappear; another kind of long-fibre elastic nitrile fabric, the palm or fingertip part of the use of polyurethane resin, or gloves with a polyethylene coating on the surface so that it is not easy to produce dust and static electricity. Antistatic gloves are mainly used for weak current, electronic industry, printing and other work involving precision instruments.
8, Dust free gloves
Processed from natural rubber, can prevent the human fingertip discharge in the production process to cause damage to the product, so that the product is not subject to finger residue, oil, dust and sweat contamination and impact in the production process, effective protection of products.
Second, the purchase of protective gloves precautions
A variety of protective gloves have different functions, so there is a certain amount of care in the purchase above, if not used properly, then the labour protection gloves may lose the unique protective function, so buy protective gloves should pay attention to the following points:
1, should be in accordance with the size of the hand to choose the right gloves, too small will be strangled to the hand is not conducive to the construction; too large will not be flexible, also affects the efficiency of work, so it is important to choose the right size gloves.
2, different working environments should also choose different gloves, the above for the introduction of gloves have different applicable scenarios, should be combined with their own working environment to choose the corresponding glove type, in order to give the gloves play out the maximum effect.
3, once the gloves are damaged to prove its protective ability will be greatly reduced, should be replaced as soon as possible to avoid the impact of use.
About Us
Ningbo Staneex Imp. & Exp. Co. Ltd is professional company integrating the design and manufacture of a wide range of hi-vis jacket safety vest,safety sweatershirt,High Visibility Hoodies,Safety Shirts,safety protective garments,safety shoes and Safety Work Gloves accessories.
Our factory can produce a variety of safety vests, class 1,class 2, class 3 vest,Day vests Mesh vests Hi-vis clothing
All our high visibility workwear are produced strictly according to standards European EN13688,EN ISO20471, EN343, EN11611, EN11612, EN1149; American ANSI/ISEA 107-2020, Canadian CSA Z96-15 and Australian AS/NZS 1906.4, AS/NZS 4602.
4, if you want to buy gloves made of synthetic rubber, you should choose the colour is uniform and smooth, the palm part of the glove is thicker, outside the palm of the area of the same degree of thinness.
